Sewing: Game Day Jersey

DSC_0049 (3)About a month ago, I did some more pattern testing for Anneliese of Aesthetic NestDSC_0053 (3)

It’s called the Game Day Jersey.  It’s kind of a basic tee with interesting details.DSC_0045 (3)This is a simple pattern with loads of potential.

DSC_0056It is a girl’s pattern, but was tested for and modeled by several boys.  It’s cool because it works for both boys and girls.

DSC_0060

DSC_0069See more versions on Aesthetic Nest  

Long overdue t shirt polo tutorial

IMG_3507

Back… oh, I don’t know when… I made a t shirt polo, posted some pattern pieces, and just kind of said, “Go for it!”  I have made more and intended on taking process photos to make a tutorial, but didn’t get to it until this week.  So, I present to you the long awaited t shirt polo tutorial.

101_9486copy

I only have the pieces in 12-18 month size, however, by simply lengthening the body pieces, you could make a 24 month size very easily.  Maybe use a bigger seam allowance to make a 6-12 month?

I’ve also made these into onesies, by extending the body pieces and adding snaps at the crotch, with good results.

IMG_4297These are very versatile and can be used for girls or boys.  The photos from the tutorial are a girly version, in fact. (I have boys, though, so the majority of the shirts I have made are for boys.)

Okay, let’s get started.  Print out the following pattern pieces at 100% scale.

T-shirt polo 1

T-shirt polo back 1

T-shirt polo back 2

T-shirt polo front1

T-shirt polo front2

Cut out your pieces.  You should have 1 front, 1 back, 2 sleeves, 2 collars, 2 top button/ collar pieces, and 2 rectangles for button placket facings.

101_9792

There is 1/2 inch seam allowance included.

Prepare the button placket on Front:  I will refer to the facings as A and B.  For facing A, simply press one rectangle in half, lengthwise, and set aside.  For facing B, press in half, lengthwise, and then fold in the raw edges 3/8 inch and press.  You are basically creating wide double fold bias tape (with your knit fabric).

101_9793
This is how to fold and press Facing B

I will also be referring to the two edges created by slitting the neckline on the Front Body piece as edge A and edge B.  Edge A will be the edge furthest away from the shoulder (left side of slit for girls/ right side for boys) and Edge B will be the other side.

Edge A: Sew Facing A to Edge A just to the bottom of the slit. (I surged the raw edge of the facing in this photo, but that is not necessary)

101_9795

101_9796

Flip Facing A to the inside of the garment.  Press.  Top stitch.

Edge B: Sandwich Edge B between folded edges of Facing B.  Pin and stitch close to the folded edge to secure this facing to the garment.  Push the tail of Facing B to the inside.

Lap facings , lining up the neck opening, and sew together.

101_9797

Trim the excess tail from the facings.  Finish that edge by serging, zig zag stitch, or leave raw.

Top stitch two rows of stitching at the base of the facings (on the front of the garment)

101_9798

Collar:  Sew the two collar pieces together, right sides facing, along the two short sides and one long side (top).  Clip Corners, turn right sides facing out, and press.

Sandwich the raw edge of the collar between the two top button/ collar pieces, right sides facing.

101_9800

Stitch around the curves and top edge to secure the collar to the top button piece.  Be careful not to stitch too far into the bottom edge.  You only want to catch the collar at the top.

101_9801

Clip curves, turn right side out.  Press. Set Aside.

101_9802

Sew Front to Back at shoulder seams.

Pin and stitch the outside of top button/ collar along the neck opening.

101_9804

Turn inside edge of top button/ collar under.  Pin and top stitch (or hand stitch if you prefer to not see that stitching).

101_9805

Whew!  Hardest part is done!

101_9806

Next, sleeves:  Finish the hem of the sleeve as desired. (serge the raw edge, turn in 1/2 inch, and top stitch)

Pin and stitch to sleeve opening.

101_9808
I gave this sleeve a little bit of extra fullness and added a pleat to be more feminine. This is completely optional.

Stitch Front to Back under the arms and down the sides.

101_9809

Hem bottom as desired.

Make button holes on outside button placket.  Sew buttons on the appropriate placket.

You’re done!

IMG_5028

IMG_3534copy

stripey t-shirt polo

T-shirt polo pattern

Update:  For the free t-shirt polo tutorial, go here!

We are heading out of town for a couple of weeks, but I wanted to get the pattern pieces for the T-shirt polo posted before taking off.  I don’t have a tutorial just yet, and I probably won’t until I get back home, but feel free to email me or comment if you have questions.  I can try to walk you through it.ImageYou’ll notice that there are 5 pages to print: 2 for each front and back, and then one for the extra stuff. Line up the word “fold” on the two front and back pieces to get an accurate pattern piece.  In addition to these pieces you’ll need 2 button placket pieces.  These are just rectangles sized 3 inches by 7 inches.

All pieces have a 1/2 inch seam allowance, the sleeve and body pieces have 1/2 inch hem allowance as well.  Lengthen or shorten those pieces by extending the lines as needed.

*Update*  I reworked some of the pattern pieces- lengthened both the front and back pieces, changed the shape of the sleeve a little bit, and lengthened the top button/ collar piece.  If you use this pattern, will you please let me know if you run into any problems?  Also, I have a tutorial coming up… I’ll post the link as soon as it’s ready.

T-shirt polo 1

T-shirt polo back 1

T-shirt polo back 2

T-shirt polo front1

T-shirt polo front2

I’d love to see your finished t shirt polos!  Send me a link to your blog or instagram or pinterest or whatever.